-250x250.jpg "Netlink Cat6 Modüler Keystone Jack Dişi Dişi")
-250x250.jpg "Netlink Cat6 Modüler Keystone Jack Dişi Dişi")
2. EL
Huawei S5700-28TP-PWR-LI-AC 24xGbE PoE+ 2xGbe 2xSfp Combo
11.590,39 TL
Vergiler Hariç: 9.658,66 TL
Aynı Marka
0,00 TL
Vergiler Hariç:0,00 TL
0,00 TL
Vergiler Hariç:0,00 TL
14.119,20 TL
Vergiler Hariç:11.766,00 TL
| Fixed Ports |
| 24 x 10/100/1,000 Base-T Ethernet ports, 4 x GE SFP ports, 2 x Combo 10/100/1,000 Base-T Ethernet ports |
| MAC Address Table |
| 16K MAC address entries MAC address learning and aging |
| Static, dynamic, and blackhole |
| MAC address entries |
| Packet filtering based on source MAC addresses |
| Interface-based MAC learning limiting |
| VLAN Features |
| 4K VLANs |
| Guest VLAN and voice VLAN |
| GVRP |
| VLAN |
| VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and interfaces |
| 1:1 and N:1 VLAN mapping |
| Jumbo frame |
| 10K |
| Reliability |
| RRPP ring topology and RRPP multi-instance |
| Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover |
| SEP |
| ERPS (G.8032) |
| STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) |
| BPDU protection, root protection, and loop protection |
| BPDU tunnel |
| IP Routing |
| Static route, RIP, RIPng (S5700-10P-LI-AC/S5700-10P-PWR-LI-AC do not support RIPng) |
| IPv6 features |
| Neighbor Discovery (ND) |
| Path MTU (PMTU) |
| IPv6 ping, IPv6 tracert, and IPv6 Telnet |
| ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, and protocol type |
| MLDv1/v2 snooping |
| Multicast |
| IGMPv1/v2/v3 snooping and fast leave |
| Multicast forwarding in a VLAN and multicast replication between VLANs |
| Multicast load balancing among member ports of a trunk |
| Controllable multicast |
| Interface-based multicast traffic statistics |
| QoS/ACL |
| Rate limiting on packets sent and received by an interface |
| Packet redirection |
| Interface-based traffic policing and two-rate and three-color CAR |
| Eight queues on each interface |
| WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms |
| Re-marking of the 802.1p priority and DSCP priority |
| Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/ port number, protocol type, and VLAN ID |
| Rate limiting in each queue and traffic shaping on interfaces |
| Security |
| Hierarchical user management and password protection |
| DoS attack defense, ARP attack defense, and ICMP attack defense |
| Binding of the IP address, MAC address, interface number, and VLAN ID |
| Port isolation, port security, and sticky MAC |
| MFF |
| Blackhole MAC address entries |
| Limit on the number of learned MAC addresses IEEE |
| 802.1x authentication and limit on the number of users on an interface |
| AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC |
| SSH V2.0 |
| Hypertext Transfer Protocol Secure (HTTPS) |
| CPU defense |
| Blacklist and whitelist |
| Access Security |
| DHCP relay, DHCP server, DHCP snooping, and DHCP security |
| Lightning Protection |
| Service interface: 6 kV |
| Super Virtual Fabric (SVF) |
| Working as an SVF client that is plug-and-play with zero configuration |
| Automatically loading the system software package and patches of clients One-click and automatic delivery of service configurations |
| Supports independent running client |
| Management and Maintenance |
| iStack (excluding S5700-10P-LI-AC, S5700-10P-PWR-LI-AC, S5700S-28P-LI-AC, S5700S-52P-LI-AC and battery LAN switches) |
| Virtual Cable Test (VCT) |
| Remote configuration and maintenance using Telnet |
| SNMP v1/v2c/v3 |
| RMON |
| eSight and web-based NMS |
| HTTPS |
| LLDP/LLDP-MED |
| System logs and multi-level alarms |
| 802.3az EEE |
| Dying Gasp (excluding battery LAN switches) |
| Device hibernation mode (excluding PWR serials switches, battery LAN switches, S5700-10P-LI, S5700-28X-LI-24S, S5701-28X-LI-24S-AC and S5700-52X-LI-48CS-AC) |
| Interoperability |
| Supports VBST (Compatible with PVST/PVST+/RPVST) |
| Supports LNP (Similar to DTP) |
| Supports VCMP (Similar to VTP) |
| Operating Environment |
| Long-term operating temperature: 0°C to 50°C |
| Relative humidity: 5% to 95% (non-condensing) |
| Input Voltage |
| AC: |
| Rated voltage range: 100V to 240V, 50 /60 Hz, Maximum voltage range: 90V to 264V, 47 Hz/63 Hz |
| : |
| Rated voltage range: –48V to –60V, Maximum voltage range: –36V to –72V |
| Note: Models supporting do not use DC power supplies. |
| Power Socket Position |
| Rear power sockets |
| Battery |
| One slot for lithium battery or lead-acid battery charger module (supported by battery LAN switches) Note |
| Battery Type |
| Internal BAT-4AHA lithium batteries and external lead-acid batteries connected to the lead-acid battery charger module in the battery slot (supported by battery LAN switches) |
| Battery Management |
| Web-based management system used to check the battery status and manage the battery (supported by battery LAN switches) |
| Dimensions (W x D x H) |
| 442 mm x 310 mm x 43.6 mm |
| Power Consumption |
| < 469.7W (: 370W) |
